Hook up electrical outlets series

If so, how do I do it? Drew Spickes Drew Spickes 2 2 8.

Tools You'll Need

I think you are confusing series and parallel, with inline and not inline. One thing, as an aside; if your jurisdiction state, municipality has adopted the Nat'l Electrical Code as legally binding, then any outlets you install in your home must be tamper-resistant it'll say TR on the face of the outlet in addition to having to be GFCI-protected in kitchens, bathrooms, and other wet areas. If the GFCIs you bought don't have the temper-resistant shutters, it is illegal to install them even as replacements; return them and ask for tamper-resistant GFCIs.

And call your county clerk. In the NEC and a majority of jurisdictions a homeowner is allowed to do their own electrical work, but a for-hire electrician must be licensed. Wiring a replacement plug generally doesn't qualify. Sherman if you're talking about stores like Home Depot and Lowes, you have to remember 1 they are not electrical supply companies, and 2 code does not say stores can't sell non-TR receptacles.


  1. speed dating philadelphia valentines day!
  2. best dating site reddit?
  3. dating alys perez wattpad.

For example, if you have a setup like this which I assume you have. You can use pigtails to connect the receptacles like this. Tester Tester k 54 BTW, the GFCIs shown in these pics, with the red and black buttons, are no longer code-compliant; you can't buy them and should not install them. New GFCIs have buttons matching the color of the outlet, and are "self-testing" so they will automatically fail open and refuse to reset when they can no longer provide protection.

Virtually nobody heeds the "test monthly" instructions on these outlets, hence the change, though the new GFCIs do still have Test buttons and do still say that ounce of prevention KeithS Just picked one up at the local big box store about a week ago. What makes them not code compliment? If you just bought them, even some years ago, they should be fine. It should say on the box or the cutsheet something to the effect that the outlet will not reset if miswired or if GFCI protection is compromised such as the outlet reaching end-of-life.

If the GFCI outlets have the captive nut style connection then you don't need the wire nuts. Also called "EZ-Wire" or similar. Basically instead of curling the wire around the screw on the outside of the plug body, by turning the screw you loosen a plate on the inside of the plug, then you insert a straight, stripped wire into the back of the plug and screw it down. This is very useful information, but it doesn't fully answer my question.

Thank you for your response!

Wire An Outlet

Thank you for addressing each of the points individually and providing insightful comments on the other answers! Thanks for the response. I have a bathroom outlet that provides power to my entire bedroom. I have no idea who came up with that idea but when I put in a GFCI and realized that the load would cut off power to the bedroom, I threw up in my mouth a little.

I plan on following your instructions for 4 because that seems to make the most sense to me. JoePhilllips If parts of your bedroom are within 6 ft of the outside edge of the bathroom sink, then those parts do need to be GFCI-protected. The 6 ft rule doesn't take partitions into account; it's just a flat 6-ft extent in all directions. Sherman Sep 28 '12 at Chris Cudmore Chris Cudmore It's possible, Although I'd rather not use the quick connects. I like the idea of torquing a screw down to hold the wire. Also, pigtails make it easier for the next person to swap something out should the need arise.

Thanks for the info.

How to Install a USB Wall Outlet {Receptacle Outlet}

There are some places where you're required to wire things up so that removing the device doesn't break the circuit. I don't recall specifically, because I always pigtail devices in anyway, so I'm always in compliance with that requirement. Sign up or log in Sign up using Google. Sign up using Facebook. Sign up using Email and Password. Post as a guest Name. Email Required, but never shown. Post Your Answer Discard By clicking "Post Your Answer", you acknowledge that you have read our updated terms of service , privacy policy and cookie policy , and that your continued use of the website is subject to these policies.

USB receptacle USB receptacle cover flat head screwdriver Phillips screwdriver needle-nose pliers wire cutters may be necessary cordless drill wire insulation stripper may be necessary. Since our circuit breaker box is so poorly labeled, and to be certain the power is off, we always do a little trick.

The trick involves a night light. For this particular project, Brad went out into the garage where our circuit breaker box is located with his cell phone and called my cell phone while I watched for the night light to go out. Now, remove the original receptacle cover with a flat head screwdriver. Take the receptacle out of the wall box.

How to Wire an Outlet in a Series

There is one screw at the top and one at the bottom. Gently pull the receptacle out of the wall. Grab the Phillips screwdriver and begin disconnecting the five wires 2 black, 2 white, 1 copper by unscrewing the screws. We just happened to start with the black wires.

How to Install a USB Wall Outlet {Receptacle Outlet}

Notice how the wires have colored insulation? The two black wires are the hot wires, which provide VAC current sources. The two white wires are the neutral wires, which provide the return paths for the current provided by the hot wires.

The copper wire without insulation is the ground wire, which is a safety feature in case the hot or neutral wires come in contact with metal parts. Save the old receptacle and wall plate.

Your Answer

We put everything in a plastic zip-loc bag. Grab your USB receptacle and start connecting the wires. Also, notice how the screws are different colors. If you purchase a different outlet yours may not be laid out or labeled like this one. Brad always connects the ground wire first because he thinks it makes connecting the other wires easier. In this case, the ground wire was connected with the green screw. Connect the white wires by inserting them and then tightening with a screwdriver.

In this case, the white wires were connected with the silver screw. Connect the black wires by inserting them and then tightening with a screwdriver. In this case, the black wires were connected with the black screw. Now, all of the wires should be connected to the receptacle. Carefully put the wires and receptacle into the wall box. Attach the receptacle to the wall box with the two screws top and bottom. Attach the USB outlet wall plate with a flat head screwdriver. Turn the power back on to the outlet.

Plug in a USB cord or two and test it out. When you plug an electronic device into the USB cord the green LED light on the outlet will turn on, well at least with this particular outlet.